Remette RT-Saker Falcon Knife Gray Titanium/Carbon Fiber, Manual Fine Grinding Satin S45VN (ASTP-2)
- RT-Saker Falcon Gray Titanium/Carbon Fiber, Manual Fine Grinding Satin, premium folding knife with S45VN steel Blade, Titanium Handle with carbon fiber inlays and button frame lock. Durability, elegance and refined ergonomics.
234,64 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
RT-Saker Falcon Gray Titanium/Carbon Fiber, Manual Fine Grinding Satin is a manifesto of a contemporary approach to EDC knives, where engineering aesthetics go hand in hand with maximum functionality. The design is based on proven materials such as S45VN steel and titanium, and its finish and details meet high-end standards . It's a tool designed for those who expect technical finesse and functional reliability in one cohesive design. Blade is made of highly regarded CPM S45VN steel, known for its excellent sharpness retention, wear resistance and operational stability even under heavy use. The applied satin finish, achieved by manual fine grinding (manual fine grinding), exposes the subtle texture of the steel and emphasizes the precision of the workmanship . The shape of the blade ensures versatility - from precision tasks to cuts requiring greater force. Handle, based on a rigid titanium construction, is complemented by inlays of two-tone carbon fiber, which not only add lightness to the design, but also reinforce its modern, technical character. Milling and chamfered lines promote ergonomics and grip stability, while a button frame lock ensures intuitive, secure operation. In addition, a deep carry clip is used, allowing the folder to be carried discreetly without losing access to the blade. RT-Saker Falcon is a proposal for demanding users and collectors who are looking for a highly functional tool, combining modern aesthetics, advanced design and perfect finish.
CPM S45VN - American martensitic high-alloy stainless steel with a hardness of 59-61 HRC, one of the best blade steels. Designed to provide better strength compared to CPM S30V, while keeping corrosion resistance at the highest level. Produced by US Crucible Industries using the particle metallurgy / Crucible® Particle Metallurgy(CPM) method. The CPM process creates a very homogeneous, high-quality steel with excellent dimensional stability, grindability and ductility compared to steels produced by conventional methods. The chemical composition has been balanced so that it is composed of 0.5% niobium carbides (Nb) along with 3.0% vanadium (V) and 14.0% chromium (Cr) carbides. The improved strength of CPM S45VN also provides better resistance to edge chipping.
Blade - CPM S45VN steel is distinguished by its abrasion resistance, excellent sharpness retention and stable performance even with prolonged use. The surface of the blade was finished by manual fine grinding satin method , which not only exposes the structure of the material, but also gives the whole an elegant, technical look. The blade profile is conducive to precise handling, while allowing confident and deep cuts for tasks that require force. A refined compound grind and geometrically optimized cutting edge increase tool efficiency and cutting control. The push-button-release Frame Lock allows us to open the knife by gravity. In addition, two classic opening methods, flipper and thumb hole.
Handle - titanium body is reinforced with elegant carbon fiber two-tone inlays , which affect both the visual balance of the design, as well as the ergonomics of the grip. The milling used improves traction and increases the knife's handling comfort, while the beveled edges make it easier to maneuver the tool at different grip angles. The button frame lock works smoothly, with a noticeable ratcheting point, ensuring safety and speed of operation. Complementing the design is a deep carry clip, which allows for low-profile, discreet carrying of the folder.
Technical data:
Product number: ASTP-2
Product name: RT-Saker Falcon Gray Titanium/Carbon Fiber, Manual Fine Grinding Satin
Overall length: 186.0 mm / 7.32"
Blade length: 76.0 mm / 2.99"
Blade thickness: 3.5 mm / 0.14"
Handle length: 108.0 mm / 4.25"
Handle thickness: 13.4 mm / 0.53"
Weight: 136.0 g / 4.8 oz
Blade material: CPM S45VN
Blade hardness: 59-61 HRC
Blade grind: Compound, Hollow/Flat
Blade Finish: Manual Fine Grinding Satin
Handle material: Titanium 6AL4V / Carbon Fiber.
Handle finish color: Gray / Black / Yellow
Backspacer material: Titanium 6AL4V
Backspacer color: Gray
Clip: Right/left, Tip-Up
Clip material: Titanium 6AL4V
Pivot mechanism: Ceramic Ball Bearing
Locking mechanism: Button Frame Lock
Opening method: Manual, thumb hole, flipper
Additional accessories: None
Designer: Remette Knives
Brand: Remette Knives
Manufacturer: Remette Knives
Country of origin: P.R.C.
Developed by: the Sharg® company
