WeKnife Coral SLT Black Titanium/Lava Flow Fat Carbon, Polished Gray CPM 20CV by Gustavo T. Cecchini (WE24044-3)
- Coral SLT Black Titanium/Lava Flow Fat Carbon, Polished Gray - compact EDC folder designed by Gustavo T. Cecchini with CPM 20CV Blade, Titanium Handle and Lava Flow Fat Carbon inlays. Sophisticated aesthetics and premium functionality.
422,73 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Coral SLT Black Titanium/Lava Flow Fat Carbon, Polished Gray is a modern EDC folder by Gustavo T. Cecchini, combining advanced material engineering with high-end segment aesthetics. Sleek form, refined details and perfect workmanship in the WeKnife manufactory make this model an excellent utility and collector's tool, aimed at the most demanding users. Blade with spear point profile is made of CPM 20CV powder steel , providing excellent abrasion resistance, exceptional cutting edge stability and full corrosion resistance. The Polished Gray finish gives the blade a modern character, effectively masking micro-scratches and signs of use. The blended grind promotes smooth cutting action with minimal resistance, resulting in high efficiency and versatility in everyday EDC applications. The Handle is made of milled titanium 6Al-4V, complemented by inlays of Lava Flow Fat Carbon, which introduce a visual depth effect and improve grip with a subtle composite texture. Ergonomic profiling and precise rounded edges ensure comfortable and stable handling even during prolonged use. The opening mechanism is based on SLT flipper working on ceramic ball bearings, which guarantees a lightning-fast and smooth unfolding of the Blade. The Frame Lock stabilizes the blade in the open position, ensuring the safety of the user. The whole is complemented by a titanium tip-up clip
Gustavo T. Cecchini - of GTC Knives, is a Brazilian-born knife maker and designer, agricultural engineer and knife enthusiast. While repairing agricultural machinery, he came across metalworking, and as a result began making knives with a fixed blade. However, it was folders that became his passion, with their variety of mechanisms and designs. His career as a knifemaker went rapidly bringing him more than 20 awards, several patents and a circle of friends around the world.
CPM 20CV - one of the best tool steels, American premium martensitic stainless steel. Produced by US Crucible Industries using the particle metallurgy / Crucible® Particle Metallurgy(CPM) method. The CPM process creates a very homogeneous, high-quality steel with excellent dimensional stability, grindability and ductility compared to steels produced by conventional methods. Designed to provide better wear resistance while maintaining corrosion resistance at the highest level. This super steel is comparable to Bohler's M390 steel or Carpenter's CTS-204P. According to some knife manufacturers, 20CV is the best of these three steels in terms of edge retention. It consists of 19.0% carbon (C), 20.0% chromium (Cr), 4.0% vanadium (V), 1.0% molybdenum (Mo) and 0.6% tungsten (W). The high percentage of chromium with a touch of molybdenum makes 20CV one of the best high-end corrosion-resistant steels.
Blade - is made of CPM 20CV powder steel , one of the leading tool steels in the premium knife segment, guaranteeing high wear resistance, long-lasting cutting edge stability and full corrosion resistance. The spear point profile combines precision cutting ability with high piercing efficiency, making the blade a versatile tool for everyday and tactical applications. The surface of the blade has been finished with Polished Gray, which reduces the visibility of micro-damage and reduces glare, giving the blade a technical, utilitarian feel. A mixed grind was used here , in the rear part it is a high, hollow ground for cutting and precision work, the so-called Hollow Ground Primary Bevel. In the front part we have a high, flat ground to strengthen the tip Flat Ground. The opening mechanism is based on SLT flipper and smooth-running ceramic bearings, which allows you to quickly and safely unfold the blade with one hand. Stable locking is provided by a solid frame lock with a steel inlay that protects the front of the lock from wiping.
Handle - made of milled titanium 6Al-4V, providing high rigidity, mechanical resistance and lightness. The main panels are enriched with inlays of a unique composite Lava Flow Fat Carbon, offering a three-dimensional optical effect and increased surface grip in all conditions. Gentle edge profiling and ergonomic finger undercuts promote comfort and control, even during prolonged use in off-road or EDC environments. The design is reinforced by a precision-fitted backspacer and a deep-carry tip-up clip , allowing the knife to be carried discreetly and steadily in a pocket. The entire design is maintained in a sleek, minimalist aesthetic, combining modern engineering with the superior workmanship typical of Cecchini's designs in the premium WeKnife line.
Case - comes with a zippered soft nylon case with the manufacturer's logo for safe storage and transportation of the folder.
Technical data:
Product number: WE24044-3
Product name: Coral SLT Black Titanium/Lava Flow Fat Carbon, Polished Gray
Overall length: 178.5 mm / 7.03"
Blade length: 74.9 mm / 2.95"
Blade thickness: 4.5 mm / 0.18"
Handle length: 103.6 mm / 4.08"
Handle thickness: 13.9 mm / 0.55"
Weight: 125.9 g / 4.44 oz
Blade material: CPM 20CV
Blade hardness: 59-61 HRC
Blade Grinding: Mixed, Hollow Ground Primary Bevel & Flat Ground Tip
Blade Finish: Polished Gray
Handle material: Titanium 6AL4V / Lava Flow Fat Carbon
Handle finish color: Black / Red
Backspacer material: Titanium 6AL4V
Backspacer color: Black
Clip: Right, Tip-Up
Clip material: Titanium 6AL4V
Pivot mechanism: Caged Ceramic Ball Bearing
Locking mechanism: Frame Lock
Opening method: Manual, SLT flipper
Additional accessories: Pouch
Designer: Gustavo T. Cecchini
Brand name: WeKnife
Manufacturer: WE Knife Co., Ltd
Country of origin: P.R.C.
Developed by: the Sharg® company
