Spyderco Swick 6 Small Black G10, Satin LC200N by Sal Glesser (FB14P6)
- Swick 6 Small Black G10, Satin, neck knife design by Sal Glesser, founder of Spyderco. LC200N stainless steel blade. Ergonomic handle with 23.1 mm finger hole and G10 composite liners. Sheath is made of Boltaron thermoplastic. An excellent tool!
173,51 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Spyderco Swick 6 Small Black G10, Satin compact knife with a sheath suitable for hanging around the neck that combines instant self-defense readiness with the convenience of everyday carry. Designed by Spyderco founder Sal Glesser, who drew inspiration from the innovative designs of French knifemaker Fred Perrin. It features a full-size pistol-style Handle and tailored for a smaller hand, a 23.1mm bore that provides full control of the tool. Thanks to its thoughtful design, the Swick 6 Small is a reliable tool for both everyday use and situations requiring a firm grip and precision cutting.
LC200N - (also known as Z-Flint) ultra-corrosion-resistant newer high nitrogen martensitic tool steel. Quite hard (60 HRC), it provides a combination of excellent strength, edge holding, chipping resistance and extreme corrosion resistance. Produced through a combination of the PESR process (pressurized electric slag remelting) and smart forging technology , resulting in an incredible increase in steel purity and a very fine, homogeneous microstructure. It contains 0.3% carbon, 15% chromium, 0.5% nitrogen, 0.95% molybdenum, 0.5% nickel and 1.0% manganese. Manufactured by ZAPP.
Blade - with Wharncliffe profile finished in elegant satin. Plain blade was brought out with a full flat grind which gives excellent cutting edge geometry and extreme cutting performance. To make it easier to control the blade, a section of the blade's back is covered with upper jimping, a notched thumb rest. Under the ramp there is a small hole, characteristic of Spyderco knives.
Handle - tang of the knife with grips, made of G10 composite, a practically indestructible material, insensitive to weather conditions, resistant to chemicals and mechanical damage. In the front part you will find an opening for the index finger, this type of grip prevents the hand from slipping on the blade. Simple, solid construction guarantees many years of use. In the rear part of the Handle, a protruding section of the tang forms a glass striker, it also contains a lanyard hole, a hole for a safety or decorative cord.
Sheath - protects from falling out and moisture, allows quick retrieval of the knife. The holster can be worn around the neck with the included ball chain. The case is made of hardened polymer, Boltaron® plastic. Sheaths and holsters made of it are characterized by scratch and chemical resistance.
Technical data:
Product number: FB14P6
Name: Swick 6 Small Black G10, Wharncliffe
Overall length: 149.0 mm / 5.87”
Blade length: 69.0 mm / 2.73”
Blade thickness: 3.0 mm / 0.118”
Handle length: n.d.
Handle thickness: n.d.
Weight: 54.0 g / 1.9 oz
Blade material: LC200N
Blade hardness: n.d.
Blade grind: Full Flat
Blade finish: Satin
Handle material: G10
Handle finish color: Black
Sheath: Boltaron®.
Additional accessories: ball chain
Designer: Sal Glesser
Brand: Spyderco
Manufacturer: Spyderco Inc., USA
Country of Origin: USA
Developed by: the Sharg® company
