Bestech Knife Ornetta Carbon Fiber / White G10, Stonewash / Satin N690 by Kombou (BL02C)
- Ornetta Carbon Fiber / White G10, Stonewashed / Satin design by Gregory "Kombou" Grabarski. The blade with a refined grind line passing into a deep armor groove, thumb hole and flipper fin allow the blade to be opened in 2 ways!
£136.22This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Ornetta Carbon Fiber / White G10, Stonewashed / Satin folder by E.D.C. with superb action and excellent ergonomics designed by Grzegorz "Kombou" Grabarski. The blade is designed for heavy use with a refined grind line going into the deep blood groove slot, slotted thumb hole and index-finger flipper allow the blade to be opened in two ways. Bestseller!
Grzegorz "Kombou" Grabarski - Polish graphic designer, photographer and talented knifemaker, chief knife maker at Bestech Knives. Known for his unconventional designs, breaking the stereotypes of knife design. Long cooperation with Bestech has resulted in exquisitely crafted knives made of the best materials, with a unique look.
N690 - corrosion-resistant, high-carbon 1.07% (C), martensitic chromium steel 17.30% (Cr) with molybdenum 1.10% (Mo), vanadium 0.10% (V) and cobalt 1.50% (Co) for structural uniformity. Features exceptionally high corrosion resistance and long edge retention. One of the best tool steels in the world today. Achieves a hardness of 59-61 HRC. Manufactured by Böhler Edelstahl in Kapfenberg, Austria.
Blade - drop point type, impressively finished with two-tone Stonewashed / Satin method. The long cutting edge converges towards the needle-sharp tip of the knife. Plain Plain blade, with a reinforcing grain for strength. The thickness of the blade and the high, flat grind give excellent cutting edge geometry and extreme cutting performance. Ceramic ball bearings support the opening of the blade in two ways, including with a quick flipper (index-finger flipper) that acts as a deerstalker when opened. The knife can also be opened using a hole in the wedge. The whole thing is locked with a modern Liner Lock.
Handle - a heavily curved, two-tone handle made of G10 composite (pressure-pressed fiberglass with synthetic resin) and carbon fiber provides an excellent grip in many positions. Chamfered cover edges eliminate sharp edges. Bolted to a solid steel backspacer, with a hole at the top for a safety or decorative cord. The pivot is decorated with a stylized letter "B". A titanium, single-position, right-handed deep-carry clip allows you to carry the knife discreetly in your pocket in the tip-up (blade tip up) position. A fore finger groove improves grip security.
Case - the knife is packed in a zippered nylon soft pouch with the brand's logo for safe carrying and storage of the folder.
Technical data:
Product number: BL02C
Product name: Ornetta Carbon Fiber / White G10, Stonewash / Satin
Overall length: 213.0 mm / 8.39"
Blade length: 90.0 mm / 3.54"
Blade thickness: 3.5 mm / 0.14"
Handle length: b,d.
Handle thickness: n.d.
Weight: 124.0 g / 4.37 oz
Blade material: N690
Blade hardness: 59-61 HRC
Blade grind: Flat
Blade finish: Stonewashed + Satin
Handle material: Carbon Fiber / G10
Handle finish color: Black / White
Backspacer material: Stainless Steel
Backspacer color: Black
Clip: Right, Tip-Up
Clip material: Titanium 6AL4V
Pivot mechanism: Caged Ceramic Ball Bearing.
Locking mechanism: Liner Lock
Opening method: Manual, flipper, thumb hole
Additional accessories: Pouch
Designer: Grzegorz "Kombou" Grabarski
Brand name: Bestech
Manufacturer: Bestech Knives
Country of origin: P.R.C.
Development: the Sharg® company