MKM Knife Goccia Black G10, Satin M390 by Jens Ansø (MKGC-GBK)
- Goccia Black G10, Satin Finish When Danish knifemaker Jens Anso showed his custom Neo, it became a dream for many knife lovers. In cooperation with MKM, a top-quality production version of this model called Goccia was created...
£236.68This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Goccia Black G10, Satin. When Danish knifemaker and knife designer Jens Ansø showed his custom model Neo, it became the dream of the "perfect knife" for many knife lovers. In cooperation with MKM, a top quality production version of this model called Goccia was created. Goccia means "drop" in Italian and is meant to symbolize the first water-powered hammers in the forges that started the knife industry in Italy. The name is also reflected in the concentric ellipses carefully milled on the handle facings that are mesmerizing with their changing surface textures.
M390 - a martensitic high-performance chrome steel produced by powder metallurgy. Due to the alloy concept, it has extremely high wear resistance and high corrosion resistance. Due to its high wear resistance, it adequately maintains the shape of the edge, so the blade stays sharp for a very long time (requiring minimal maintenance). Another of the advantages is resistance to the formation of "wire" during sharpening. The steel has a high chromium content of 20.0% (Cr) doped with 1.9% carbon (C), vanadium 4.0% (V), and is hardened between 59-61 HRC. This super steel is comparable to Carpenter's CPM 20CV or CTS-204P steels. Manufactured by Böhler Edelstahl in Kapfenberg, Austria.
Blade - satin drop point blade mounted on a ball bearing provides opening speed and smoothness much better than pad based solutions. Flipper flipper which opens the knife has been slimmed so that it does not stick out above the line of the handle. After opening it creates a mini-guard preventing the hand from slipping on the blade. Thickness of blade provides high strength while high, flat grind guarantees excellent cutting properties. The generous belly of the blade extends the length of the cutting edge in relation to the length of the head converging towards a needle sharp tip.
Handle - two plates of black G10, perfectly milled on 3D numerical machine in elliptical circles. Here the mastery of Jens Anso's design is revealed, the handle is perfectly ergonomic, and the elliptical circles, in addition to the aesthetic function, also play a practical role, increasing grip security. On the inside, in the milled out facings there is a steel skeleton of the knife, with Liner Lock. In the back massive titanium backspacer with characteristic Jens Anso lanyard hole. Backspacer and decorative collar around the pivot in blue anodized titanium. Right-handed, one-position titanium deep carry clip allows you to carry the knife discreetly in tip-up position.
Carrying case - comes with an elegant pouch made of Cordura with the manufacturer's logo with the possibility to strap it to your belt.
Technical data:
Product number: MK GC-GBK
Product name: Goccia Black G10, Satin
Overall length: 200.0 mm / 7.87"
Blade length: 85.0 mm / 3.35"
Handle length: 115.0 mm / 4.53"
Blade thickness: 4.0 mm / 0.16"
Weight: 110.0 g / 3.88 oz
Blade Material: Bohler M390 Microclean
Blade Hardness: 58-60 HRC
Blade grind: Flat
Blade finish: Satin
Handle Material: Black G10
Handle Finish Color: Black
Backspacer Material: Blue anodized titanium Gr. 5 Ti6AI4V
Backspacer color: Blue
Clip: Right, Tip-Up
Clip material: Blue anodized Titanium
Pivot mechanism: Ball bearings rotation mechanism
Lock: Liner lock
Designer: Jens Anso
Brand: MKM
Manufacturer: Maniago Knife Makers, Italy
Country of origin: Italy
Developed by: Sharg® Company