MKM Isonzo Clip Point Grey FRN Knife, Stonewashed N690 by Jesper Voxnæs (MK FX03-3PGY)
- Maniago Knife Makers is a consortium of companies coming from the famous "knife basin" of Maniago, Italy. In collaboration with the best knifemakers, they create excellent knives with the best materials.
£104.13This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Isonzo Clip Point Grey FRN, Stone Washed by Jesper Voxnaes. Compact and lightweight everyday carry knife made of very good materials.
M390 - a martensitic high-performance chrome steel produced by powder metallurgy. Due to the alloy concept, it has extremely high wear resistance and high corrosion resistance. Due to its high wear resistance, it adequately maintains the shape of the edge, so the blade stays sharp for a very long time (requiring minimal maintenance). Another of the advantages is resistance to the formation of "wire" during sharpening. The steel has a high chromium content of 20.0% (Cr) doped with 1.9% carbon (C), vanadium 4.0% (V), and is hardened between 59-61 HRC. This super steel is comparable to Carpenter's CPM 20CV or CTS-204P steels. Manufactured by Böhler Edelstahl in Kapfenberg, Austria.
Blade - clip point made of Bohler N690Co stainless steel, which holds sharpness well and is very easy to sharpen. Opens with a hole in the blade, so it can be used by left and right-handed people without any problems. The small thickness of the blade in combination with the high, flat grind gives us cutting properties almost on the level of a razor. On the back of the blade there is a small jimping (notched part) on which you can comfortably rest your thumb. The blade was finished with stonewash method. The entire blade is locked with a proven and popular liner lock.
Handle - made of grey FRN (Fiberglass Reinforced Nylon), a very light and durable material. It was screwed to an orange, aluminium backspacer in the shape of a carabiner. This makes it easier to carry the knife on the equipment or backpack straps. To improve grip, the handle has been deeply textured. A two-position (right/left) deep carry clip allows the knife to be carried in tip-up position. To reduce weight, it is made of steel wire (wire clip). Includes torx key in sizes 6 and 8.
MKM, or Maniago Knife Makers, is a consortium representing knife makers. It is based in Maniago itself, about 70 miles from Venice, in the Friuli Venezia Giulia region (Italy). Founded in 1960, the consortium brings together manufacturers of knives, scissors and similar products and has been promoting local craftsmanship for almost 60 years. The MKM brand, already used in the past, has been refreshed and relaunched to offer new collections, created through partnerships with local knife makers. MKM is committed to cutting-edge technology and first-rate creativity, without forgetting more than 500 years of tradition.
Technical data:
Product number: MK FX03-3PGY
Product name: Isonzo
Overall length: 145mm / 5.71"
Blade length: 49mm / 1.93"
Handle length: 86mm / 3.37"
Blade thickness: 3mm / 0.12"
Weight: 70g / 2.47 oz
Blade Material: Bohler N690Co
Blade hardness: 58-60HRC
Blade Edge: Flat
Blade Finish: Stone Washed
Handle material: FRN (Fiberglass Reinforced Nylon)
Handle finish colour: Grey
Backspacer material: Aluminium
Backspacer colour: Red
Clip: Two-position (right/left), Tip-Up
Clip material: Stainless steel
Pivot mechanism: Steel bearings
Lock: Liner lock
Designer: Jesper Voxnaes
Brand: MKM
Manufacturer: Maniago Knife Makers, Italy
Country of origin: Italy
Developed by: Sharg® Company