Remette RT-Aurora Knife Gray Titanium/Carbon Fiber, Manual Fine Grinding Satin/Pearlescent M390 (AURA-P)
- Aurora Gray Titanium/Carbon Fiber, Manual Fine Grinding Satin/Pearlescent, elegant folding knife with titanium Handle and carbon fiber inlays. Blade made of M390 steel finished by hand, axis lock, ceramic bearings.
182,92 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Aurora Gray Titanium/Carbon Fiber, Manual Fine Grinding Satin Surface/Pearlescent Surface is a premium folder , which combines industrial minimalism with everyday practicality. Designed for users who appreciate precision craftsmanship and purity of form, it stands out for its harmonious combination of technology and elegance. Handle made of 6AL4V titanium, treated with ceramic sandblasting, offers a subtly matte surface that resists scratches. Carbon fiber inserts add a modern touch to the design, while improving grip ergonomics. Blade made of Böhler M390 powder steel provides exceptional durability and excellent edge retention. A drop point profile and concave (hollow) grind are used, which translates into high precision and effectiveness in everyday use. The hand-finish combines fine grinding satin with a pearlescent effect , giving the blade a subtle sheen and tactile texture. Opening is supported by ceramic ball bearings and double-sided thumb study, which guarantees smooth operation. Safety is ensured by the axis lock, known for its reliability and intuitive operation. The design is complemented by a double-sided deep carry clip made of titanium, allowing for low-profile pocket carry. Aurora is the ideal EDC tool for those looking for a combination of modern materials, excellent ergonomics and advanced manufacturing technology.
M390 - martensitic high-performance chrome steel produced by powder metallurgy. Due to the alloy concept, it has extremely high wear resistance and high corrosion resistance. Due to its high wear resistance, it adequately maintains the shape of the edge, so the blade stays sharp for a very long time (requiring minimal maintenance). Another of the advantages is resistance to the formation of “wire” during sharpening. The steel has a high chromium content of 20.0% (Cr) doped with 1.9% carbon (C), vanadium 4.0% (V), and is hardened between 59-61 HRC. This super steel is comparable to Carpenter's CPM 20CV or CTS-204P steels. Manufactured by Böhler Edelstahl in Kapfenberg, Austria.
Blade - with drop point profile was made from M390 powder steel, known for its abrasion resistance and excellent sharpness retention. A concave (hollow) grind was used, which reduces cutting resistance and increases the efficiency of the blade. The surface has been hand-finished using the fine grinding satin method , with an additional pearlescent surface effect that adds visual depth and an elegant sheen. The knife is opened by thumb studies on both sides, and smooth movement is ensured by ceramic ball bearings embedded in the housing. The whole is locked by an axis lock mechanism, which combines lightness of handling with a high level of security.
Handle - 6AL4V titanium skeleton, the surface of which has been treated with ceramic sandblasting, providing a matte finish resistant to traces of use. Carbon fiber inserts , embedded precisely in the recesses, increase grip and add visual contrast. The axis lock works with ceramic bearings, which translates into velvety smoothness of folding and unfolding the blade. The design is crowned by a double-sided deep carry clip made of titanium, allowing the folder to be carried discreetly. The ergonomic shape, symmetrical layout and high quality finish make the Aurora model an excellent everyday tool.
Technical data:
Product number: AURA-P
Product name: Aurora Gray Titanium/Carbon Fiber, Manual Fine Grinding Satin Surface/Pearlescent Surface.
Overall length: 180.0 mm / 7.09"
Blade length: 70.0 mm / 3.35"
Blade thickness: 3.0 mm / 0.12"
Handle length: 105.0 mm / 4.72"
Handle thickness: 12.5 mm / 0.53"
Weight: 95.5 g / 3.37 oz
Blade material: Böhler M390
Blade hardness: 60-62 HRC
Blade grind: Hollow
Blade finish: Manual Fine Grinding Satin Surface/Pearlescent Surface.
Handle material: Titanium 6AL4V / Carbon Fiber.
Handle finish color: Gray / Black
Backspacer material: Titanium 6AL4V
Backspacer color: Gray
Clip: Right/left, Tip-Up
Clip material: Titanium 6AL4V
Pivot mechanism: Ceramic Ball Bearing
Locking mechanism: Axis Lock
Opening method: Manual, thumb stud
Additional accessories: None
Designer: Remette Knives
Brand: Remette Knives
Manufacturer: Remette Knives
Country of origin: P.R.C.
Developed by: the Sharg® company
