Sencut Vornix Knife Teal Green G10, Black 9Cr18MoV (S25038-1)
- Vornix Teal Green G10, Black - folding EDC knife with 9Cr18MoV stainless steel blade, durable G10 composite handle, liner lock and flipper opening. A functional folder for everyday tasks, equipped with a deep carry clip.
46,76 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Vornix Teal Green G10, Black was created for those users who focus on practicality and simplicity of design. In this compact folder managed to combine utilitarian geometry, durable materials and intuitive mechanism of operation, creating a tool that will perform well in a variety of conditions of everyday use. The 9Cr18MoV steel used offers good sharpness retention and corrosion resistance, making the Blade a durable and easy to maintain item. With a well-chosen clip point profile and hollow grind to support cutting precision, the blade remains effective and predictable in handling. The flipper and thumb stud-based opening mechanism allows quick access to the tool, no matter the situation. Handle made of G10 composite, lightweight and resistant to damage, has been molded to provide secure guidance of the knife and stability in the hand. Its simple body emphasizes the utilitarian nature of the design, and the textured surface enhances traction even in adverse conditions. Responsible for locking the blade is the liner lock, which works securely and continuously promotes safe operation. This is complemented by a deep carry clip, allowing the folder to be carried discreetly without sacrificing access convenience. Vornix is a design aimed at those who appreciate utility, durability and a clear design, which does not try to be more than a solid tool for everyday tasks - that's why it works whenever you need it.
Sencut - is another sub-brand of WE Knife, a company that produces knives of the highest global quality. Production is done on the same production lines as WE, so the highest standard of assembly is maintained.
9Cr18MoV - high-grade stainless knife steel. A high content of 18.0% chromium (Cr) and an average of 0.95% carbon (C) provide high hardness and corrosion resistance, while the addition of alloying elements 1.3% molybdenum (Mo), 0.8% silicon (Si), 0.12% vanadium (V) increase strength and wear resistance. 9Cr18MoV is characterized by high hardness in the range 58-60 HRC. It is used in the manufacture of knives, including damascus and surgical blades, swords, scissors, cutlery.
Blade - made of 9Cr18MoV steel, offers satisfactory resistance to wear, as well as easy to maintain sharpness. The clip point profile allows you to accurately guide the cut, while the hollow grind enhances the performance of work on various types of materials. The flipper operates smoothly and without resistance, allowing the blade to be opened instantly with one hand. We can also open the knife with the thumb stud.
Handle - G10 composite grips offer low weight with high mechanical resistance. Their texture positively affects the grip, regardless of external conditions. The Liner Lock stably locks the blade during use, providing a sense of security in all conditions. Thanks to the deep carry clip, the knife can be carried deep in the pocket, while maintaining discretion and accessibility. The overall design is simple, but consistently functional - ideal for everyday EDC users.
Technical data:
Product number: S25038-1
Product name: Vornix Teal Green G10, Black
Overall length: 214.0 mm / 8.43"
Blade length: 92.6 mm / 3.65"
Blade thickness: 3.0 mm / 0.12"
Handle length: 121.4 mm / 4.78"
Handle thickness: 12.0 mm / 0.47"
Weight: 102.7 g / 3.62 oz
Blade material: 9Cr18MoV
Blade hardness: 58-60 HRC
Blade grind: Hollow
Blade finish: Black coating
Handle material: G10
Handle finish color: Teal Green
Backspacer material: Stainless Steel (spacer sleeves)
Backspacer color: Black
Clip: Right/Left, Tip-Up
Clip material: Stainless Steel
Pivot mechanism: Caged Ceramic Ball Bearing
Locking mechanism: Liner Lock
Opening method: Manual, thumb stud, flipper
Additional accessories: Pouch
Designer: Sencut
Brand: Sencut Knife
Manufacturer: WeKnife Co., Ltd.
Country of origin: P.R.C
Developed by: the Sharg® company
