Sencut Slybolt Knife Dark Green Canvas Micarta, Black 9Cr18MoV (S25001A-1)
- Slybolt Dark Green Canvas Micarta, Black - an EDC folder by Sencut with a contoured Micarta composite handle and a clip point blade with a high belly for precision cutting. Compact, lightweight, with crossbar lock and deep carry clip.
49,56 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Slybolt Dark Green Canvas Micarta, Black is a versatile EDC knife designed by Sencut for users who prefer compact but fully functional designs. It features a slim silhouette, a distinct blade profile and a balanced balance between convenience and durability. The form of the Blade's clip point blade gives the knife a slightly curved character, which is perfect for precision tasks - such as cutting soft materials, outdoor kitchen work or everyday utility tasks. The 9Cr18MoV stainless steel used provides good corrosion resistance, while the black coating emphasizes the technical, utilitarian style of the tool. A convenient opening mechanism based on a double-sided thumb study allows the blade to be efficiently unfolded regardless of the dominant hand, while the crossbar lock enhances safety and control while working. The design has been optimized for lightness, and the ergonomic Micarta milled handle offers high comfort even during prolonged use. The whole design is complemented by a tip-up deep carry clip and a solid back milling (jimping) for the thumb.
Sencut - is another sub-brand of WE Knife, a company that produces knives of the highest global quality. Production is done on the same production lines as WE, so the highest standard of assembly is maintained.
9Cr18MoV - high-grade stainless knife steel. A high content of 18.0% chromium (Cr) and an average of 0.95% carbon (C) provide high hardness and corrosion resistance, while the addition of alloying elements 1.3% molybdenum (Mo), 0.8% silicon (Si), 0.12% vanadium (V) increase strength and wear resistance. 9Cr18MoV is characterized by high hardness in the range of 58-60 HRC. Used in the manufacture of knives, including damascus and surgical blades, swords, scissors, cutlery.
Crossbar Lock - a crossbar that moves horizontally in longitudinal cutouts in the steel side plates of the handle frame. When the knife is opened, the locking bar overlaps the back of the blade from above, preventing its return movement. This beam is pressed down by two springs. Unlocking is done by pulling back the locking bar, the ends of which are accessible through cutouts in the grips on the sides of the Handle grips. In the closed position, the bar presses against the cam surface at the back of the Blade, preventing it from opening on its own. Advantages of the Crossbar Lock include resistance to contamination, practical insensitivity to dynamic loads, ease of operation with both right and left hands, and lightweight operation.
Blade - clip point with a clearly marked belly offers excellent control when cutting and working with materials of varying density. The blade is made of 9Cr18MoV stainless steel, known for its ease of sharpening and decent wear resistance in everyday use. The flat grind improves cutting efficiency, while the black coating gives the blade a technical look. Thumb study on both sides and back milling(jimping) allow for comfortable opening and stable handling of the knife.
Handle grips - Canvas Micarta composite grips with a fine, non-slip texture and milling, ergonomically improve grip and control. The molded finger choil makes it easier to handle the blade with precision, and the full profile of the Handle naturally guides the hand to a firm grip. The crossbar lock mechanism operates smoothly in both directions, ensuring safety and intuitive operation. The design is complemented by a tip-up deep-carry clip, which allows the knife to be carried discreetly in a pocket or by the sheath.
Technical data:
Product number: S25001A-1
Product name: Slybolt Dark Green Canvas Micarta, Black
Overall length: 209.1mm / 8.23"
Blade length: 91.2mm / 3.59"
Blade thickness: 3.0mm / 0.12"
Handle length: 117.9 mm / 4.64"
Handle thickness: 13.0 mm / 0.51"
Weight: 103.5 g / 3.65 oz
Blade material: 9Cr18MoV
Blade hardness: 58-60 HRC
Blade grind: Flat
Blade finish: Black coating
Handle material: Canvas Micarta
Handle finish color: Dark Green
Backspacer material: Stainless Steel (spacer sleeves)
Backspacer color: Black
Clip: Right/Left, Tip-Up
Clip material: Stainless Steel
Pivot mechanism: Caged Ceramic Ball Bearing
Locking mechanism: Crossbar Lock
Opening method: Manual, thumb stud
Additional accessories: Pouch
Designer: Sencut
Brand: Sencut Knife
Manufacturer: WeKnife Co., Ltd.
Country of origin: P.R.C
Developed by: the Sharg® company
