Sencut Aetheris Knife OD Green G10, Black 9Cr18MoV (S24095-2)
- Aetheris OD Green G10, Black - an elegant EDC knife with a classic 9Cr18MoV stainless steel drop point blade, and an ergonomic G10 composite handle. Modern aesthetics and everyday functionality in a lightweight, balanced design.
46,52 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Aetheris OD Green G10, Black is for those who appreciate a versatile folding knife that combines elegant design with practical utility. Stylistically based on clean, balanced lines, it fits the idea of modern minimalism - subtle, but technically refined. The design assumed maximum functionality for everyday tasks, without sacrificing sophistication. Blade is made of 9Cr18MoV stainless steel, whose corrosion resistance and good sharpness retention make it a proven choice in EDC knives. The classic drop point profile and hollow grind guarantee precise cutting and control, regardless of the material. The black coating emphasizes the tactical look of the overall design. Handle grips are based on textured G10 grips, set on steel liners for structural strength. The composite texture combined with milling improves the grip and gives the whole thing a modern, lightweight look. The opening system with flipper and thumb stud, supported by ball bearings, works quickly and smoothly. The design is complemented by a deep carry clip, which allows convenient carrying in a pocket.
Sencut - is another sub-brand of WE Knife, a company that produces knives of the highest global quality. Production takes place on the same production lines as WE, so the highest standard of assembly is maintained.
9Cr18MoV - high-grade stainless knife steel. A high content of 18.0% chromium (Cr) and an average of 0.95% carbon (C) provide high hardness and corrosion resistance, while the addition of alloying elements 1.3% molybdenum (Mo), 0.8% silicon (Si), 0.12% vanadium (V) increase strength and wear resistance. 9Cr18MoV is characterized by high hardness in the range 58-60 HRC. Used in the manufacture of knives, including damascus and surgical blades, swords, scissors, cutlery.
Blade - with drop point profile made of stainless steel 9Cr18MoV, valued for its resistance to corrosion and easy maintenance. The hollow gr ind allows for efficient cutting and stable blade guidance, especially for precision work. The black coating gives the Blade a tactical look and reduces the visibility of minor scratches. The opening mechanism is based on a flipper and thumb stud, and the whole is supported by Ball bearings, ensuring smooth operation and quick response.
Handle grips - G10 composite grips are combined with steel liners, which ensures adequate rigidity and durability of the entire structure. Soft surface texture and milling on the back (jimping) improve grip and safety of knife handling. Ergonomic profiling adapts to different hand shapes. Utility elements, such as the deep carry clip and cord hole, increase functionality and make the Aetheris model perfect as an EDC knife for everyday tasks.
Technical data:
Product number: S24095-2
Product name: Aetheris OD Green G10, Black
Overall length: 217.1 mm / 8.55"
Blade length: 93.5 mm / 3.68"
Blade thickness: 3.0 mm / 0.12"
Handle length: 123.6 mm / 4.81"
Handle thickness: 12.0 mm / 0.47"
Weight: 112.6 g / 3.97 oz
Blade material: 9Cr18MoV
Blade hardness: 58-60 HRC
Blade grind: Hollow
Blade finish: Black coating
Handle material: G10
Handle finish color: OD Green
Backspacer material: Stainless Steel (spacer sleeves)
Backspacer color: Black
Clip: Right/Left, Tip-Up
Clip material: Stainless Steel
Pivot mechanism: Caged Ceramic Ball Bearing.
Locking mechanism: Liner Lock
Opening method: Manual, thumb stud, flipper
Additional accessories: Pouch
Designer: Sencut
Brand: Sencut Knife
Manufacturer: WeKnife Co., Ltd.
Country of origin: P.R.C
Developed by: the Sharg® company
