Reate PL-7 Knife Green / Black Micarta, Black PVD Nitro-V (PL-7 GRBKM PVD)
- PL-7 Green/Black Micarta, Black PVD - modern trailing point folding knife with pivot lock mechanism, Nitro-V stainless steel blade and Micarta composite handle. Aesthetics, innovation and precision in the premium EDC class.
179,01 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
PL-7 Green/Black Micarta, Black PVD represents a new interpretation of the PL line, which combines aggressive blade geometry, advanced pivot lock mechanics and carefully refined ergonomics. The manufacturer Reate, known for its high quality workmanship and strict assembly control, proposes a design based on Persian styling with a distinctively curved trailing point blade and a Micarta Handle, which is both an aesthetic and utilitarian element. Blade is made of Nitro-V, stainless steel with enhanced corrosion resistance and high edge retention. The black PVD coating gives it a deep matte tone and increases surface durability under heavy use. The hollow grind allows for precise pull cuts, while the flipper system and high-performance ball bearings ensure fast, smooth one-handed blade unfolding. The pivot lock used on the PL-7 is a unique mechanism based on the main axis, allowing the blade to be safely locked and released with one hand. The design of the Handle has been adapted to this system - Micarta with a slightly thickened profile provides high comfort and secure grip. The finish is complemented by a deep carry clip made of titanium and a lanyard hole. This is a knife for users who appreciate reliability, originality and technological precision in an everyday tool.
Nitro-V stainless martensitic knife steel based on chromium was introduced by New Jersey Steel Baron(NJSB). The manufacturer used the existing superior AEB-L knife steel and upgraded it with nitrogen and vanadium to improve edge performance and achieve high hardness and extreme corrosion resistance, especially crucial in the marine industry and humid environments. Nitro V can be used in diving knives because of its resistance to staining and corrosion. The recommended working hardness is between 58-62HRC, and it has very good impact strength compared to other steels. It is harder than stainless powder steels such as M390, Elmax and S35VN. Therefore, Nitro-V will be a good fit for knives that require good strength.
PVD (Physical Vapor Deposition) - The resistance of the surface of the blade and cutting edge has been enhanced by a vacuum deposition method used to deposit thin films by condensing an evaporated form of the desired material onto the surface of the workpiece. The coating method involves a purely physical process such as high-temperature vacuum evaporation followed by condensation. The applied coating has a very high hardness which significantly increases the resistance of the blade to rust and abrasive wear.
Blade - with a trailing point profile is distinguished by a clearly curved back line and an elongated belly, which translates into high efficiency in pulling cuts and precise maneuvers. The base material is Nitro-V steel, prized for its balance of rust resistance, edge durability and ease of sharpening. The black PVD coating creates a uniform protective barrier against abrasion and corrosion, while enhancing the tactical nature of the knife. The hollow grind improves material penetration and working sharpness while maintaining structural integrity. The flipper system located at the back of the blade is supported by Ball bearings, which ensures fast, responsive opening without play or resistance.
Handle - made of two-tone Micarta, a material resistant to moisture and temperature changes, with a laminated structure that increases durability while maintaining low weight. The milled finish provides a secure grip without excessive roughness. The pivot lock mechanism, centrally embedded, allows intuitive locking and releasing of the blade by pressing the axis screw. The slightly enlarged profile improves ergonomics, especially for longer tasks. The overall design is complemented by a double-sided titanium deep-carry clip, allowing for discreet carrying, and a lanyard hole, which enhances attachment and security options. The accuracy of fit and finish of all components confirm the premium quality, for which the Reate brand is known.
Technical data:
Product number: PL-7 GRBKM PVD
Product name: PL-7 Green/Black Micarta, Black PVD
Overall length: 203.0 mm / 8.0"
Blade length: 88.9 mm / 3.5"
Blade thickness: 3.9 mm / 0.15"
Handle length: 114.0 mm / 4.5"
Handle thickness: n.d.
Weight: 127.0 g / 4.48 oz
Blade material: Nitro-V
Blade hardness: 60 HRC
Blade grind: Flat
Blade finish: Black PVD coating
Handle material: Micarta
Handle finish color: Green/Black
Backspacer material: Micarta
Backspacer color: Black
Clip: Right/Left, Tip-Up
Clip material: Titanium
Pivot mechanism: Ball bearings
Locking mechanism: Pivot Lock
Opening method: Manual, flipper
Additional accessories: None
Designer: Reate Knives
Brand: Reate Knives
Manufacturer: Reate Knives, Inc.
Country of Origin: P.R.C.
Developed by: the Sharg® company
