K25 Thrower Knife Titanium 7Cr17Mov (32375)
- K25 Thrower Knife Titanium 7Cr17MoV (32375) - a sturdy full-tang throwing knife with a balanced design and titanium coated 7Cr17MoV blade. A precision tool for training and recreational throwing enthusiasts.
21,85 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
The K25 Thrower Knife Titanium 7Cr17MoV (32375) is a state-of-the-art training tool designed for sports throwing enthusiasts - both beginners and advanced. Its full tang construction guarantees strength, rigidity and resistance to the stresses typical of dynamic training in field conditions or at the shooting range. Blade made of 7Cr17MoV stainless steel provides good resistance to corrosion and maintains sharpness when repeatedly contacting hard targets. The applied titanium coated finish further protects the surface from abrasion and gives it a tactical, tarnished character, reducing glare and wear marks. The optimized balance and symmetrical geometry of the entire knife allow for predictable and repeatable throwing trajectories, regardless of technique or grip direction. The lack of grips and minimalist form ensure clean release from the hand and versatility of use. A lanyard hole, which allows you to attach a carry line, is located in the back of the design. The 32375 combines durability, simplicity and technical precision - a tool ready for intensive training sessions and recreational outdoor activities.
7Cr17MoV is a martensitic chromium steel, often referred to as an improved version of 440A steel. Its nominal chemical composition includes about 0.60-0.75% carbon (C) and 16.0-18.0% chromium (Cr), with additions of molybdenum (Mo) and vanadium (V) in smaller amounts. The higher chromium content provides very good corrosion resistance in typical environments. Carbon is responsible for hardness, which after appropriate heat treatment can reach about 56-58 HRC, which is sufficient for many applications. Molybdenum increases hardenability and improves resistance to pitting corrosion, while vanadium contributes to the formation of fine carbides, which increases abrasion resistance and allows the cutting edge to remain sharp longer. 7Cr17MoV steel is widely used in the mass production of kitchen knives, folding knives for everyday use (EDC), multi-tools and outdoor equipment, where a good combination of corrosion resistance, acceptable hardness and ease of sharpening is crucial .
Blade - formed in spear point profile, providing a central tip and excellent symmetry - key features for effective and stable throwing. The construction material is 7Cr17MoV stainless steel , known for its resistance to corrosion and retention of hardness even under heavy use. The surface of the blade is coated with a durable titanium coated, which minimizes glare and protects against micro-scratches. The flat grind used facilitates penetration of the target and supports proper weight distribution in flight. The uniform geometry without aggressive lines and redundant chamfers ensures easy release of the knife from the hand and a precise trajectory. Blade is designed to maximize functionality - regardless of throwing direction, environmental conditions or user experience.
Handle - is an integral part of the full tang design , made of the same 7Cr17MoV steel monobloc as the Blade. The smooth, symmetrical form and lack of grips allow for both blade and grip throws - which increases the technical flexibility of the knife and allows you to adjust the style of use to individual preferences. The titanium-coated finish used provides visual consistency throughout the design, protects the steel from oxidation and adds a distinctive, tactical look to the tool. The lack of texture and smooth surface reduce the risk of snagging on skin, gloves or clothing items during dynamic movement. In the back there is a rope hole, which allows you to attach a paracord - making it easier to find and pull the knife from the blade. The Handle of the 32375 model is a functional layout, durable and suitable for intensive throwing training in all conditions.
Technical data:
Product number: 32375
Name: Thrower Knife Titanium
Overall length: 195.0 mm / 7.68"
Blade length: 95.0 mm / 3.74"
Blade thickness: 4.5 mm / 0.18"
Handle length: 100.0 mm / 3.94"
Handle thickness: n.d.
Weight: 89.0 g / 3.14 oz
Blade material: 7Cr17MoV
Blade hardness: n.d.
Blade grind: Flat
Blade finish: Titanium coating
Handle material: 7Cr17MoV
Handle finish color/finish color: Titanium coating
Sheath (holster): Nylon
Additional accessories: None
Designer: Martinez Albainox
Brand name: K25
Manufacturer: Martinez Albainox S.L.U., Spain
Country of origin: n.d.
Developed by: the Sharg® company
