Martinez Albainox 3D Skull Boot Knife Black ABS, Black 3Cr13Mov (32617)
- 3D Skull Boot Knife Black ABS, Black 3Cr13MoV - a tactical boot knife with a symmetrical dagger blade and a black ABS handle with a 3D skull motif. Sheath included for mounting at the boot or belt.
12,93 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
The Martinez Albainox 3D Skull Boot Knife Black ABS, Black 3Cr13MoV (32617) is a compact knife with aggressive aesthetics and functionality characteristic of tactical designs. Modeled after classic boot knives , it combines a compact form with design elements that emphasize its military character. The Handle, made of durable ABS plastic, has been covered with a fine texture, which increases surface grip. It's a tool created for users who expect a knife to be ready for action and unconventional in design. Blade is made of 3Cr13MoV stainless steel and is decorated with a three-dimensional skull motif, which gives the tool a distinctive look. The black coating increases the blade's abrasion resistance and eliminates light reflections, supporting operations in conditions with limited visibility. The symmetrical profile of the dagger allows for effective penetration and precise cuts regardless of the angle of entry, which translates into efficiency in emergency situations. The compact ergonomically shaped Handle supports a secure grip even in dynamic conditions. Thanks to the 3D texture and the hole for the safety cable, the design provides not only style, but also practical adaptability to your equipment. The entire design is complemented by a plastic sheath, allowing easy mounting to a belt or footwear. The 32617 is ideal for knife enthusiasts with a distinctive design, ready for action at any time.
3Cr13MoV is a martensitic chromium steel that has been enriched with molybdenum (Mo) and vanadium (V) to improve its performance properties. The typical chemical composition includes about 0.26-0.35% carbon (C), 12.5-14.5% chromium (Cr), 0.4-0.6% molybdenum (Mo) and 0.1-0.2% vanadium (V). The addition of chromium provides corrosion resistance, while molybdenum increases hardenability, high-temperature strength and resistance to pitting corrosion. Vanadium contributes to the hardness, wear resistance and fine grain structure of the steel. 3Cr13MoV is used for knives (often found in folding knives and hunting knives), medical tools and other applications where a good combination of corrosion resistance, hardness and strength is required. It is an improved version of 3Cr13 steel, offering better sharpness retention and overall durability.
Blade - with a dagger profile is designed for effective penetration and precise handling during use. The 3Cr13MoV stainless steel guarantees corrosion resistance and ease of maintenance - key features for a tool designed for dynamic use in the field and tactical situations. A black protective coating reduces the blade's visibility and increases its abrasion resistance. The double-sided cutting edge allows for an even cutting guide, regardless of the knife's positioning, which supports intuitive movements in stressful situations. Blade's compact format facilitates concealed carry, while its flat geometry improves ease of penetration with minimal resistance.
Handle - made of black ABS plastic, impact and weather resistant. Gently textured which improves grip, increasing control of the tool during dynamic maneuvers. The shape has been ergonomically refined to promote grip stability regardless of conditions. There is a rope hole in the back , allowing you to attach a safety or mount it to your equipment. Included is a rigid plastic sheath , designed to be mounted to a boot or belt. It's a tactical tool with a compact design and distinctive look, ideal for urban, off-road and emergency use.
Technical data:
Product number: 32617
Name: 3D Skull Boot Knife Black ABS, Black.
Overall length: 230.0 mm / 9.06 "
Blade length: 120.0 mm / 4.72"
Blade thickness: 4.0 mm / 0.16"
Handle length: 110.0 mm / 4.33"
Handle thickness: n.d.
Weight: 89.0 g / 3.14 oz
Blade material: 3Cr13MoV
Blade hardness: n.d.
Blade grind: Flat
Blade finish: Black coating
Handle material: ABS
Handle finish color/finish color: Black
Sheath (holster): ABS
Additional accessories: None
Designer: Martinez Albainox
Brand name: Martinez Albainox
Manufacturer: Martinez Albainox S.L.U., Spain
Country of origin: n.d.
Developed by: the Sharg® company .
