Martinez Albainox Set 3 Throwing Knife Satin 3Cr13Mov (32754)
- 32754 Set 3 Satin – a set of three throwing knives from Martinez Albainox, made from a single piece of 3Cr13MoV stainless steel. The full tang construction, spear point profile, and satin finish guarantee repeatability and durability during training.

This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
32754 Set 3 Satin is a complete set of throwing knives, designed for users looking for tools with optimized geometry and durable construction. Each knife is made from a single piece of 3Cr13MoV stainless steel, ensuring high impact resistance and no structural weaknesses. The symmetrical spear point profile enhances flight stability and facilitates precise embedding in the target, both in rotary and no-spin techniques. The satin finish reduces light reflections and improves aesthetics, while masking traces of use. The lack of a classic cutting edge makes the knives safe for training and intended for recreational throwing only. Sheath made of nylon makes it possible to carry the entire set in a comfortable and orderly manner - regardless of field conditions. The 32754 is the choice for those looking for a durable, balanced and ready-to-use training set.
3Cr13MoV is a martensitic chromium steel that has been enriched with molybdenum (Mo) and vanadium (V) to improve its performance properties. The typical chemical composition includes about 0.26-0.35% carbon (C), 12.5-14.5% chromium (Cr), 0.4-0.6% molybdenum (Mo) and 0.1-0.2% vanadium (V). The addition of chromium provides corrosion resistance, while molybdenum increases hardenability, high-temperature strength and resistance to pitting corrosion. Vanadium contributes to the hardness, wear resistance and fine grain structure of the steel. 3Cr13MoV is used for knives (often found in folding knives and hunting knives), medical tools and other applications where a good combination of corrosion resistance, hardness and strength is required. It is an improved version of 3Cr13 steel, offering better sharpness retention and overall durability.
Blade - symmetrical spear point profile , designed for optimal target penetration and repeatable trajectory. Constructed from 3Cr13MoV steel for corrosion resistance and durability when repeatedly hitting a target. The lack of sharp edges makes this model safe for training in controlled conditions. The satin finish not only reduces glare, but also enhances aesthetics and minimizes the visibility of scratches. The one-piece construction promotes even weight distribution, which translates into precision in rotary and non-rotary techniques. Blade of each knife has been optimized for training utility - without unnecessary elements, but fully functional.
Handle - an integral part of the knife - is a full tang construction without separate grips. Thanks to its symmetrical form and rounded edges, it allows a comfortable and natural grip in various styles of throwing. The smooth steel surface makes it easy to maintain, and the option of using a braided cord gives the user the option to customize the grip to their preference. The Handle is designed with balance, durability and ease of use in mind. The overall design is complemented by a nylon she ath with internal compartments and belt attachment for easy organization and quick access during training. It's a minimalist but thoughtful component - ideal for learning and developing throwing techniques.
Technical data:
Product number: 32754
Name: Set 3 Satin
Overall length: 180.0 mm / 7.09"
Blade length: 65.0 mm / 2.56"
Blade thickness: 2.9 mm / 0.11"
Handle length: 115.0 mm / 4.53"
Handle thickness: n.d.
Weight: 36.0 g / 1.27 oz
Blade material: 3Cr13MoV
Blade hardness: n.d.
Blade grind: Flat
Blade finish: Satin
Handle material: 3Cr13MoV
Handle finish color/finish color: Satin
Sheath (holster): Nylon
Additional accessories: None
Designer: Martinez Albainox
Brand name: Martinez Albainox
Manufacturer: Martinez Albainox S.L.U., Spain
Country of origin: Spain
Developed by: the Sharg® company