Midgards Messer Thunrar Backup Gray Steel, Satin 14C28N by Ralph Zlobinsky neck knife (MM017)
- Thunrar Backup Gray Steel, Satin, a strong, lightweight knife with a fixed blade and monolithic construction. Blade made of Sandvik 14C28N stainless steel for good sharpness retention. Comfortable skeletonized handle. Flat kydex sheath with Tek-Lok
£130.13This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Thunrar Backup Gray Steel, Satin strong, lightweight knife with a fixed blade and monolithic construction. Skeletonized handle grip with finger hole for a secure and comfortable grip in the most demanding conditions. The high-quality Sandvik 14C28N stainless steel blade features excellent sharpness retention, making it an excellent tool for professionals and outdoor enthusiasts. The flat kydex sheath, equipped with the Tek-Lok attachment system, which ensures easy and secure carrying of the knife.
14C28N - Martensitic chromium stainless steel is the latest development in a range of knife steels produced by Sweden's Sandvik steel mills. An optimized chemical composition with a unique combination provides superior quality, excellent edge performance, high hardness and corrosion resistance. By reducing the amount of carbon 0.62% (C) and increasing the chromium content 14.0% (Cr), as well as adding nitrogen 0.11% (N), corrosion resistance has been significantly improved. Considered an improved version of 13C26 steel. Unbeatable in the price / quality category!
Blade - Clip Point type, finished with elegant satin finish. The generous belly extends the length of the cutting edge in relation to the length of the wide blade converging towards the needle-sharp tip of the knife. The thickness of the blade and the flat grind give excellent cutting edge geometry and extreme cutting performance. A notched section of the Blade's back, the spine jimping ramp gives solid support, making the knife easier to handle for precision work.
Handle - tang of the knife with a series of holes to reduce weight and improve grip. At the top and bottom you will find a notched (jimping) section to improve control of the knife. The simple, solid design guarantees many years of use. Finger fore ring placed on the front prevents the knife from slipping while working and also allows you to perform simple manual work without putting down the knife.
Sheath - when designing, great emphasis was placed on the ease of carrying and retrieving the knife. Made of Kydex plastic. Complete with Tek-Lok, a practical multi-position mount suitable for attaching to the armor or to the trouser belt.
Technical data:
Product number: MM017
Name: Thunrar Backup Gray Steel, Satin
Overall length: 195.0 mm / 7.68”
Blade length: 85.0 mm / 3.34”
Blade thickness: 6.5 mm / 0.25”
Handle length: n.d.
Handle thickness: n.d.
Weight: 150.0 g / 5.29 oz
Blade material: Sandvik 14C28N
Blade hardness: n.d.
Blade grind: Flat
Blade finish: Satin
Handle material: Sandvik 14C28N
Handle color/finish color: Gray
Sheath (holster): Kydex
Additional accessories: Tek-Lok type attachment
Designer: Ralph Zlobinsky
Brand name: Midgards Messer
Manufacturer: Midgards Messer GmbH
Country of origin: Germany
Developed by: the Sharg® company