Bestech Malware Grey Titanium, Stonewashed/Satin CPM S35VN by Todd Knife and Tool (BT1902A)
- Malware Grey Titanium, Stonewashed/Satin a stylish folding knife with a Wharncliffe blade profile that stands out from the crowd. Another of the unconventional knife designs of brothers Seth and Teryl Todd of TKT "Todd Knife and Tool".
£209.68This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Malware Grey Titanium, Stonewashed/Satin Standing out from the crowd, this stylish folder with Wharncliffe blade profile is another of the unconventional knife designs of brothers Seth and Teryl Todd of TKT "Todd Knife and Tool". The refined ergonomics complement the natural curves of the hand, providing maximum surface contact and superior control. Industrial design meets the best materials and technical solutions here.
Todd Knife and Tool - a family business founded by brothers Todd, Seth and Teryl also known as YouTuber Zelrick42. TKT specializes in designing and building prototypes that can be put into production. Their knives are designed to perform specific tasks, maintain exceptional ergonomics and be easy to carry on a daily basis, they also have a distinctive design language that sets them apart from the designs of other makers.
CPM S35VN - American martensitic high-alloy stainless steel with a hardness of 59-61 HRC, one of the best steels for blades. Designed to provide better strength compared to CPM S30V, while keeping corrosion resistance at the highest level. Manufactured by US Crucible Industries using the particle metallurgy / Crucible® Particle Metallurgy (CPM) method. The CPM process creates a very homogeneous, high-quality steel with excellent dimensional stability, grindability and ductility compared to steels produced by conventional methods. The chemical composition has been balanced so that it is composed of 0.5% niobium carbides (Nb) along with 3.0% vanadium (V) and 14.0% chromium (Cr) carbides. Replacing some of the niobium carbides with vanadium carbides makes the steel about 15-20% harder than S30V without sacrificing wear resistance, and it is also easier to machine and polish. The improved strength of CPM S35VN also provides better resistance to edge chipping.
Blade - wharncliffe type, straight cutting edge, which can pierce and cut, with a striking Two Tone finish, satin cut, the rest of the blade finished with Stonewashed method. The thickness of the blade provides high strength while the high, flat grind gives excellent cutting edge geometry and extreme cutting performance. Ceramic ball bearings support the opening of the blade with a quick flipper (index-finger flipper). We can also open the knife using a hole in the wedge (thumb hole). The entire blade is locked with the proven and popular frame lock with a steel inlay to prevent wiping of the lock face. On the back you will find a perfectly made "jimping", notches on which you can put your finger thus improving the grip and control of the knife during use. The whole is locked with a proven and popular frame lock with a steel inlay to prevent wiping of the lock face.
Handle - is two pieces of solid titanium 6AL4V. Chamfered edges of the covers eliminate sharp edges for comfort and improve grip security. The solid titanium backspacer to which the grips are attached guarantees the rigidity and strength of the entire structure. The pivot axis decorated with the logo of the designers, Todd Knife and Tool. A single-position, right-handed titanium clip allows the knife to be carried in tip-up position, with the tip of the blade upward.
Case - the knife is packaged in a zippered nylon soft pouch with the brand's logo for safe carrying and storage of the folder.
Technical data:
Product number: BT1902A
Product name: Malware Grey Titanium, Stonewashed/Satin
Overall length: 223.0 mm / 8.78"
Blade length: 98.0 mm / 3.86"
Blade thickness: 3.9 mm / 0.15"
Handle length: n.d.
Handle thickness: n.d.
Weight: 106.0 g / 3.74 oz
Blade material: CPM S35VN
Blade hardness: 60-61 HRC
Blade grind: Flat
Blade finish: Stonewashed / Satin
Handle material: Titanium 6AL4V
Handle finish color: Grey
Backspacer material: Titanium 6AL4V
Backspacer color: Grey
Clip: Right, Tip-Up
Clip material: Titanium 6AL4V
Pivot mechanism: Caged Ceramic Ball Bearing
Locking mechanism: Frame Lock
Opening method: Manual, thumb hole, flipper
Additional accessories: Pouch
Designer: Todd Knife and Tool
Brand: Bestech
Manufacturer: Bestech Knives
Country of origin: P.R.C
Developed by: the Sharg® company