Microtech Makora Signature D/E Black DLC Aluminium/Black Inlays, Black DLC by Tony Marfione (206-1TS)
- Microtech Makora Signature D/E Black DLC Aluminium/Black Inlays, Black DLC is a full-size OTF automatic knife. Operating in D/A mode, it features a hell of a fast blade extension mechanism. Designed by Tony Marfione owner of Microtech Knives
£522.24This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Makora Signature D/E Black DLC Aluminum/Black Inlays, Black DLC is a full-size OTF (Out The Front) automatic knife. Equipped with a hell of a fast mechanism that extends a razor sharp blade. 100% made and assembled in the USA. Designed by Anthony Marfione, knifemaker and owner of Microtech Knives.
DLC (Diamond Like Carbon) durability of the blade's surface is enhanced with a matte black nanocomposite coating, which exhibits unique properties such as exceptional hardness and low friction, as well as excellent corrosion protection. It is one of the most resistant coatings to scratches and abrasion that are used in the industry, including the knife industry.
Blade - machine ground D/E (Double Edge Dagger) type, sharpened on both sides. Coated with a black DLC coating. The blade was brought out with a high flat grind (Flat Grind), providing excellent cutting properties. As a result, while maintaining high strength, the knife has excellent piercing properties. The strong mechanism of extending/retracting the blade with the help of the moled Thumb Slide, a stepped thumb slide, requires for safety the application of a specific force to overcome the resistance of the spring. The method of opening provides seamless opening for both right and left-handed people.
Handle - made with perfect precision in 3D technology on CNC milling machines, from black DLC-coated 6061-T6 aluminum with artfully glued inserts of sandpaper-textured material. The surface texture of the Handle makes the knife non-slip in the hand during use. There are notches (jimping) on the back and bottom of the handle for a more secure grip. The slim profile and milled two-position (right/left) solid deep-carry clip allow the knife to be carried discreetly in a pocket, in tip-down (blade tip down) position. The clip bears the Makora series logo (ant), Anthony Marfione's signature, as well as the serial number and date of manufacture. The Handle is finished with a glass striker, a solid steel triangle, into which a tungsten carbide ball has been pressed.
Technical data:
Product number: 206-1TS
Product name: Makora Signature D/E Black DLC Aluminum/Black Inlays, Black DLC
Overall length: 216.0 mm / 8.5"
Blade length: 86.4 mm / 3.4"
Blade thickness: 3.0 mm / 0.12"
Handle length: 130.0 mm / 5.1"
Handle thickness: 13.7 mm / 0.54"
Weight: 94.1 g / 3.32 oz
Blade material: n.d.
Blade hardness: n.d.
Blade grind: Flat
Blade finish: Black DLC coating
Handle material: 6061-T6 Aluminum with inlays
Handle finish color: Black
Backspacer material: 6061-T6 Aluminum
Backspacer color: Black
Clip: Right/left, Tip-down
Clip material: Stainless Steel
Pivot mechanism: n.d.
Locking mechanism: Slide Lock
Opening method: Automatic, push/pull Thumb slider
Additional accessories: none
Designer: Anthony Marfione
Brand: Microtech Knives
Manufacturer: Microtech Knives
Country of origin: USA
Developed by: the Sharg® company