Spyderco Pacific Salt 2 FRN Yellow, Spyder H2 Knife (C91SYL2)
- Pacific Salt 2 FRN Yellow, Spyder, one of the best SALT knives the size of the legendary Endura. Made of salt and rust resistant H2 stainless steel suitable for prolonged exposure to moisture. Ideal for boaters, anglers, fishermen.
154,57 €
This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Pacific Salt 2 FRN Yellow, Spyder one of the most popular knives in the SALT line, the size and shape of the legendary Endura knife. An upgraded version of the lightweight folder, designed for use in extreme conditions by Spyderco founder Sal Glesser. It is made from a salt- and rust-resistant H2 steel that is designed to withstand prolonged exposure to moisture, and is unique. Knives made of this steel are in demand among sailors, divers, fishermen, fishermen and survival enthusiasts.
H-2 - improved austenitic stainless knife steel is the successor to H-1 steel, produced by Japanese steel foundry Myodo Foundry. The high-chromium, low-carbon (rolled without heat treatment) stainless steel contains 13.73% chromium, 0.09% carbon, 0.17% copper and 0.06% nitrogen. The knife can stay in fresh water as well as sea water, and will not rust even when left wet after use. The result was achieved by adding chromium and nickel to the steel, and replacing some of the carbon with nitrogen. All the internal parts of the steel have been specially treated, making them resistant to rust and salt.
Spyder Edge - (Spyderco patent) new serrated Spyder blade with improved edge geometry, consists of alternating one large and two small teeth so-called two-step. This pattern increases the length of the cutting edge by up to 24% compared to a straight blade. Ideal for cutting hard materials, plastics and fibrous materials such as ropes, belts, among others.
Blade - with Clip Point profile, 2.9 mm thick. Enlarged 14 mm circular cutout in the SpyderHole wedge (Spyderco patent) increased the hump of the thumb support (notched ramp) and allowed to open the knife with wet or cold hands and in a glove. The serrated blade of the Spyder Edge was derived with a concave grind (Hollow Grind) for effective, deep cuts. Blade Back-Lock with an additional Boye Detent cutout, preventing accidental release of the lock when gripping the knife firmly.
Handle - in yellow color. Made of FRN (Fiberglass Reinforced Nylon), a fiberglass reinforced nylon material. Covered with non-slip Bi-Directional Texturing (Bi-Directional Texturing) that strengthens the grip even with wet hands Folder is equipped with a solid screw-on black steel clip (top/bottom, left/right) that allows you to carry the knife in tip-up or tip-down position. In the back of the grips a hole (lanyard hole) for pulling a lanyard or cord.
Technical data:
Product number: C91SYL2
Product name: Pacific Salt 2 FRN Yellow, Spyder.
Overall length: 221.0 mm / 8.72"
Blade length: 96.0 mm / 3.78"
Blade thickness: 2.9 mm / 0.114"
Handle length: 126.0 mm / 4.98"
Handle thickness: n.d.
Weight: 82.0 g / 2.9 oz
Blade material: H2
Blade hardness: n.d.
Blade grind: Hollow
Blade finish: Satin
Handle material: FRN (Fiberglass Reinforced Nylon).
Handle finish color: Yellow
Backspacer material: H2 Steel
Backspacer color: Gray
Clip: Tip-Up/Tip-Down, Left/Right
Clip material: Stainless Steel
Pivot mechanism: Washers
Locking mechanism: Back Lock
Opening method: Manual, thumb hole
Additional accessories: None
Designer: Sal Glesser
Brand: Spyderco
Manufacturer: Spyderco, U.S.A.
Country of Origin: Japan
Developed by: the Sharg® company
