MKM Fara Green Canvas Micarta, Satin M390 by Lucas Burnley knife (MK MY01-GC)
- Fara Green Canvas Micarta, Satin slim EDC folder with modern design, made of the best materials. Equipped with SlipJoint "no lock" mechanism, legal in most countries. Design by well-known knife maker Lucas Burnley.
£152.21This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Fara Green Canvas Micarta, Satin slim EDC folder with modern design, made of the best materials. Equipped with SlipJoint "no lock" mechanism, legal in most countries. Design by well-known knife maker Lucas Burnley.
Lucas Burnley - a well-known and respected American knife maker and designer, who began creating high-end knives for his proprietary Burnley Knives line in 2003. Each of the knives made under the Burnley Knives brand is handcrafted and assembled and as a result, their availability is very limited. By establishing partnerships with MKM, Böker, CRKT, his products have become available to a larger audience.
M390 - a martensitic high-performance chromium steel produced by powder metallurgy. Due to the alloy concept, it has extremely high wear resistance and high corrosion resistance. Due to its high wear resistance, it adequately maintains the shape of the edge, so the blade stays sharp for a very long time (requiring minimal maintenance). Another of the advantages is resistance to the formation of "wire" during sharpening. The steel has a high chromium content of 20.0% (Cr) doped with 1.9% carbon (C), vanadium 4.0% (V), and is hardened between 59-61 HRC. This super steel is comparable to Carpenter's CPM 20CV or CTS-204P steels. Manufactured by Böhler Edelstahl in Kapfenberg, Austria.
SlipJoint - a "no lock" non-locking mechanism used in folders. It uses spring pressure on a flat notch on the back of the blade to keep the blade open during use. The Slip Joint holds the blade in both the folded and unfolded positions. Opens and closes fairly freely with half-stop safety, stops in the half-closed position to prevent accidental closing.
Blade - clip point type finished with an elegant satin finish. Opening by means of a milled groove (nail groove) in the wedge, so called nail nick. The small thickness of the blade in combination with a high flat grind gives us cutting properties almost at the level of a razor.
Handle - facings made of CNC-milled Canvas Micarta, pressure-pressed canvas with synthetic resin. The coverings were screwed to the backspacer, which means the practically indestructible nature of such a design. Decorative ring around the pivot so called pivot collar made of blue anodized aluminum. At the back of the handle a wide lanyard hole, a hole used for attaching a safety or decorative cord.
Sheath - included hand-stitched pouch made of high-quality buffalo leather with brand logo. Attached to the belt with a magnetic clasp.
Technical data:
Product number: MK MY01-GC
Product name: Fara Green Canvas Micarta, Satin
Overall length: 180.0 mm / 7.09"
Blade length: 76.0 mm / 2.99"
Blade thickness: 2.5 mm / 0.1"
Handle length: n.d.
Thickness of handle: n.d.
Weight: 76.0 g / 2.68 oz
Blade material: Böhler M390
Blade hardness: 58 - 60 HRC
Blade grind: Flat
Blade finish: Satin
Handle material: Canvas Micarta
Handle finish color: Green
Backspacer material: Stainless steel
Backspacer color: Gray
Clip: None
Clip material: n.d.
Pivot mechanism: Shims
Locking mechanism: Slip Joint
Opening method: Manual, nail nick
Additional accessories: sheath
Designer: Lucas Burnley
Brand: MKM
Manufacturer: Maniago Knife Makers, Italy.
Country of origin: Italy
Developed by Sharg®