LionSteel Myto, Green Canvas Micarta, Satin M390 by Michele Pensato (MT01 CVG)
- Myto, Green Micarta, Satin Hi-Tech folder with durable frame-lock. Exceptional EDC knife, M390 steel blade, ReF blade located on the underside of the blade, Double Crown ball bearing system, titanium clip, Hand HY 68 key.
£240.70This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Myto Green Canvas Micarta, Satin, high-tech Hi-Tech folder with heavy-duty frame-lock. An exceptional E.D.C. knife from the Italian LionSteel manufactory. Equipped with M390 sintered steel blade, "ReF" fin on the underside of the blade, Double Crown ball bearing system and titanium clip. LionSteel Hand (#HY 68), Torx T6, Torx 8 screw adjustment wrench along with Hex wrench for glass striker screw are included.
Design by Molletta, fruit of a collaboration with a well-known and respected designer with many years of experience. Michele Pensato (a.k.a. Molletta), is distinguished by a new approach to the use of materials and experimentation in the application of heat treatment and the use of advanced software in knife design.
M390 - a martensitic high-performance chrome steel produced by powder metallurgy. Due to the alloy concept, it has extremely high wear resistance and high corrosion resistance. Due to its high wear resistance, it adequately maintains the shape of the edge, so the blade stays sharp for a very long time (requiring minimal maintenance). Another of the advantages is resistance to the formation of "wire" during sharpening. The steel has a high chromium content of 20.0% (Cr) doped with 1.9% carbon (C), vanadium 4.0% (V), hardened between 59-61 HRC, subjected to vacuum and cryogenic treatments and double tempering. This super steel is comparable to Carpenter's CPM 20CV or CTS-204P steels. Manufactured by Böhler Edelstahl in Kapfenberg, Austria.
Blade - Drop Point finished in an elegant Satin method. Plain blade derived with Flat Grind which gives excellent cutting edge geometry and extreme cutting performance. Frame-Lock reinforced monolithic 6AI4V titanium blade lock, one of the grip linings acts as a locking mechanism. Located on the underside of the blade, the protrusion / flipper, supported by the Double Crown ball bearing system, facilitates the opening of the blade. In the open position, it serves as a lower guard / hilt protecting the hand from slipping off the handle.
ReF - (Removable Flipper System) located on the underside of the blade protrusion / flipper fin assisted by Double Crown makes it easier to open the blade with one hand. It consists of a small lever (protrusion) that extends beyond the back of the handle when the head is closed. In the open position, the protrusion acts as a stinger, protecting the hand from slipping on the blade. In the folder, it is possible to unscrew the Removable Flipper System lever (unscrew the flipper fin, then insert the second screw included in the box) and open the blade with both hands. This is important in countries where there is a ban on the use of knives with one-handed opening blades in public places.
Double Crown - the Double Crown ball bearing system is an evolution of the standard mechanism. It improves blade rotation, allows faster, even smoother opening of the blade, and keeps the blade stable in a straight line.
Handle - left side, presentation, made of green Canvas Micarta (pressure-pressed canvas with synthetic resin). The right side is 3D-machined solid titanium screwed to a CNC-milled titanium backspacer, which means that such a design is virtually indestructible. The titanium Solid® clip allows you to carry the knife in tip-up position (tip up). The clip is bolted to the titanium frame with a tungsten carbide screw/glass striker. In the back of the lanyard hole facings, a hole for a cord.
Includes:
- Myto folder, Green Micarta, Satin
- HY 68 wrench
- additional screw for the flipper fin
- elegant cardboard gift box, fully recyclable
Technical data:
Product number: MT01 CVG
Name: Myto, Green Canvas Micarta, Satin
Overall length: 201.0 mm / 7.91"
Blade length: 83.0 mm / 3.27"
Handle length: n.d.
Blade thickness: 4.0 mm / 0.16"
Thickness of handle: n.d.
Weight: 96.0 g / 3.39 oz
Blade material: Böhler M390 Microclean®
Blade hardness: 59-61 HRC
Blade grind: Flat
Blade finish: Satin
Handle material: Canvas Micarta / Titanium
Handle finish color: Green / Gray
Backspacer material: Titanium
Backspacer color: Black
Clip: Right/Left, Tip-Up
Clip material: Titanium
Pivot mechanism: Double Crown Ball Bearing (ball bearings)
Locking mechanism: Frame Lock
Opening method: Manual, flipper
Additional accessories: Torx T6 and T8, Hex
Designer: Michele "Molletta" Pensato
Brand: lionSTEEL
Manufacturer: lionSTEEL sas di Pauletta Gianni M. D.
Country of origin: Italy
Development: by Sharg® company