WE Knife Roxi 3 Black Titanium, Black Stonewashed CPM S35VN by Todd Knife and Tool (WE19072-2)
- Roxi 3 Black Titanium, Black Stonewashed by Seth & Teryl Todd is one of the uncommon knife designs from Todd Knife and Tool. An excellent S35VN steel folder made by WeKnife, one of the best companies in the world!
282,45 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Roxi 3 Gray Titanium, Gray Stonewashed is one of the extraordinary knife designs by brothers Seth and Teryl Todd of TKT "Todd Knife and Tool" made from the finest materials.
CPM S35VN - American martensitic stainless steel, designed to provide better strength compared to CPM S30V, while maintaining corrosion resistance at the highest level. The chemical composition has been balanced so that it is composed of 0.5% niobium carbides along with 3.0% vanadium and 14.0% chromium carbides. Replacing some of the niobium carbides with vanadium carbides makes it about 15-20% harder than S30V without sacrificing wear resistance. It is also easier to machine and polish. The improved CPM strength of S35VN provides better resistance to edge chipping. The CPM process produces a very uniform, high-quality steel with excellent dimensional stability, grindability and ductility compared to steels produced by conventional methods. Manufactured at Crucible Particle Metallurgy (CPM) mills.
Blade - wharncliffe type is made of S35VN steel, currently one of the best tool steels in the world. It can be opened with the front flipper, so it can be easily used by left and right-handed people. It can also be opened with a hole in the blade. Ceramic ball bearings are responsible for smooth operation of the opening mechanism. Small thickness of the blade in combination with high, flat grind gives us cutting properties almost on the level of a razor. On the back we find perfectly made "jimping", notches on which we can put our finger to improve grip and control over the knife during use. The blade was finished with "black stonewash" method. The knife is locked with a proven and popular frame lock with a steel insert that prevents the lock face from rubbing off.
Handle - thick pieces of titanium, connected to each other by a titanium backspacer. The simplicity and solidity of the construction ensure many years of use. One-position clip (right), made of titanium, allows you to carry the knife in tip-up position. In the back of the backspacer there is a hole for threading a safety or decorative cord. As in other models, the pivot is decorated with a stylized logo of the manufacturer.
Technical specifications:
Product number: 19072-2
Product name: Roxi 3 Black Titanium, Black Stonewashed
Overall length: 182.9 mm / 7.2"
Blade length: 79.7 mm / 3.14"
Handle length: 104.0 mm / 4.09"
Blade thickness: 4.0 mm / 0.16"
Handle Thickness: 12.4 mm / 0.49"
Weight: 120.74 g / 4.25 oz
Blade Material: CPM S35VN
Blade hardness: 59-61 HRC
Blade grind: Flat
Blade Finish: Black Stonewash
Handle Material: Titanium 6AL4V
Handle Finish Color: Black
Backspacer Material: Titanium 6AL4V
Backspacer color: Black
Clip: Right, Tip-Up
Clip Material: Titanium 6AL4V
Pivot mechanism: Caged Double Row Ceramic Ball Bearing
Lock: Frame lock
Designer: Seth Todd & Teryl Todd
Brand: WeKnife
Manufacturer: WE Knife Co., Ltd
Country of origin: P.R.C.
Developed by Sharg® Company
