WE Knife Mini Buster Gray Titanium, Polished Bead Blasted CPM 20CV by Snecx Tan (2003A)
- Mini Buster Gray Titanium, Polished Bead Blasted by Snecx Tan is one of Snecx Tan's uncommon knife designs from Snecx Design Lab. An excellent CPM20CV steel folder made by WeKnife, one of the best companies in the world!
£293.70This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Mini Buster Gray Titanium, Polished Bead Blasted is one of the unconventional designs by Malaysian knifemaker and designer Snecx Tan. Based on the custom Buster knife, the compact version of the knife is one of the most exciting folders available in production and at an attractive price.
Snecx Tan - considered the most mechanically innovative knife designer in the world Malaysian knifemaker and designer famous for his unique custom knives from Snecx Design Lab. Snecx Design Lab was established in 2015 to create the IFS-20 concept boltless knife, which made Snecx Tan a legend in the knife world.
CPM 20CV - one of the best tool steels in the world, an American premium martensitic stainless steel. Manufactured by US Crucible Industries according to the Crucible® Particle Metallurgy (CPM) process. The CPM process yields a very homogeneous, high-quality steel with excellent dimensional stability, grindability and ductility compared to steels produced by conventional methods. Designed to provide better wear resistance while maintaining corrosion resistance at the highest level. This super steel is comparable to Bohler's M390 steel or Carpenter's CTS-204P. According to some knife manufacturers, 20CV is the best of these three steels in terms of edge retention. It consists of 19.0% carbon, 20.0% chromium, 4.0% vanadium, 1.0% molybdenum and 0.6% tungsten. The high percentage of chromium with a touch of molybdenum makes 20CV one of the best high-end corrosion-resistant steels.
Blade - type sheepsfoot. Opens with a flipper, so it can be easily used by left and right-handed people. Ceramic ball bearings ensure smooth operation of the opening mechanism. Small thickness of the blade in combination with high, flat grind gives us cutting properties almost on the level of a razor. On the back we find perfectly made "jimping", notches on which we can put our finger to improve grip and control over the knife during use. The blade was finished with "black stonewash" method. The knife is locked with a proven and popular frame lock with a steel insert which protects the front of the lock from wear.
Handle - made of thick pieces of titanium, connected to each other with a titanium backspacer. The simplicity and solidity of the construction ensure many years of use. One-position clip (right), made of titanium, allows you to carry the knife in tip-up position. In the back of the backspacer there is a hole for threading a safety or decorative cord. As in other models, the pivot is decorated with a stylized logo of the manufacturer.
Included is an elegant pouch for carrying/storing the knife.
Technical specifications:
Product number: 2003A
Product name: Mini Buster Gray Ti
Overall length: 202.5 mm / 7.97"
Blade length: 87.1 mm / 3.43"
Handle length: 115.4 mm / 4.54"
Blade thickness: 4.0 mm / 0.16"
Handle Thickness: 13.0 mm / 0.51"
Weight: 114.0 g / 4 oz
Blade Material: CPM-20CV
Blade hardness: 59-61 HRC
Blade grind: Flat
Blade finish: Polish Bead Blast
Handle Material: Titanium 6AL4V
Handle Finish Color: Gray
Backspacer Material: Titanium 6AL4V
Backspacer color: Gray
Clip: Right, Tip-Up
Clip Material: Titanium 6AL4V
Pivot mechanism: Caged Double Row Ceramic Ball Bearing
Lock: Frame lock
Designer: Snecx Tan
Brand name: WeKnife
Manufacturer: We Knife Co., Ltd.
Country of origin: P.R.C.
Development: a Sharg® company
