WE Knife Seer LE No 539/610 Black Titanium, Rubbed Silver CPM 20CV (WE20015-1)
- Seer Black Titanium / Blue Satin, Hand Rubber Silver LE (Limited Edition 001/610). Limited to 610 psc knives. E.D.C. folder with serial number 539, made of the finest materials. Custom design by WE Knife.
£227.68This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Seer Black Titanium / Blue Satin, Hand Rubber Silver LE (Limited Edition 001/610). Limited to 610 psc knives. E.D.C. folder with serial number 539, made of the finest materials. Custom design by WE Knife.
CPM 20CV - one of the best tool steels in the world, an American premium martensitic stainless steel. Manufactured by US Crucible Industries according to the Crucible® Particle Metallurgy (CPM) process. The CPM process yields a very homogeneous, high-quality steel with excellent dimensional stability, grindability and ductility compared to steels produced by conventional methods. Designed to provide better wear resistance while maintaining corrosion resistance at the highest level. This super steel is comparable to Bohler's M390 steel or Carpenter's CTS-204P. According to some knife manufacturers, 20CV is the best of these three steels in terms of edge retention. It consists of 19.0% carbon, 20.0% chromium, 4.0% vanadium, 1.0% molybdenum and 0.6% tungsten. The high percentage of chromium with a touch of molybdenum makes 20CV one of the best high-end corrosion-resistant steels.
Blade - drop point type. For easier sharpening, the beginning of the cutting edge starts with a small choil. The applied flat grind gives us cutting properties almost on the level of a razor. On the back we find perfectly made "jimping", notches on which we can put our finger to improve grip and control over the knife during use. The blade was finished with "hand rubbed satin" method. Opens with a flipper so it can be used by left and right-handed people without any problems. Ceramic ball bearings ensure smooth operation of the opening mechanism. The entire mechanism is locked with a proven and popular frame lock with a steel insert protecting against wiping the lock face.
Handle - made of solid 6AL4V titanium anodized in black finished with stonewashed method. Both facings were screwed together creating a simple and solid construction. A two-position (right/left) titanium deep carry clip allows the knife to be carried in tip-up position. The back of the handle has a place to thread a safety or decorative cord around one of the spacer sleeves. As in other models, the pivot is decorated with a stylized logo of the manufacturer.
Case - included zippered soft nylon case with the manufacturer's logo for safe storage and transportation of the folder.
Technical specifications:
Product number: 20015-1
Product name: Seer Black Titanium / Blue Satin, Hand Rubber Silver LE
Overall length: 208.3 mm / 8.2"
Blade length: 88.3 mm / 3.48"
Handle length: 120.0 mm / 4.72"
Blade thickness: 3.2 mm / 0.126"
Handle thickness: 11.4 mm / 0.45"
Weight: 107.38 g / 3.79 oz
Blade material: CPM 20CV
Blade hardness: 59-61 HRC
Blade edge: Flat
Blade finish: Hand Rubbed Silver
Handle material: Titanium 6AL4V
Handle finish color: Black Stonewashed with Blue Accents
Clip: Right/Left, Tip-Up
Clip material: Titanium 6AL4V
Pivot mechanism: Caged Ceramic Ball Bearing
Locking mechanism: Frame-Lock
Opening method: Manual, thumb hole
Additional accessories: Pouch
Designer: WE Knife
Brand: WeKnife
Manufacturer: We Knife Co., Ltd
Country of origin: P.R.C.
Development: a Sharg® company
